|
| IHE50R |
| |
Main Features |
| ■ Industrial standard housing Ø 50mm |
| ■ Hollow shaft Ø10, Ø12, Ø14, Ø15 |
| ■ Up to 5000 PPR |
| ■ 4.5…30V with short circuit-proof push-pull output |
| ■ 4.5V…30V with RS422 interface |
| ■ IP Class:IP65 |
|
|
|
|
|
Electrical Data
| Output waveform |
Incremental (A, B, Z and inverted) |
|
| Zero or index pulse |
(Z) one pr. Rev. |
|
| Output |
Push-pull. RS422 line driver |
|
| Supply-voltage (Vin) |
Min 4,5V to Max. 30V * Reverse polarity protection |
|
| Current (no load) |
Max. 45 mA |
|
| Max. load pr. output |
30 mA -(Short circuit protected) * |
|
| V Out low |
Max. 500 mV @ I =10 mA |
|
| Operating temp. |
- 40°C to + 85°C |
|
| Storage temp. |
- 40°C to + 85°C |
|
| Max. pulse frequency |
300 kHz * |
|
| V out high |
Min. (Vin -0,6) @ I = -10mA Min. (Vin -1,3) @ I = -25mA |
|
| Cable data |
8 leads (0,14 mm²) pair-twisted/shielded |
|
| Output signals |
Standard, Inverted, Differential (RS-422A compatible,5V) |
|
| Certified acc. to |
EN 50081-1 and EN 50082-2 |
|
| |
| Mechanical Data |
|
| Materials |
|
| Housing |
Aluminum |
| Shaft |
Brass |
| Bearings |
Lifetime lubricated ball bearings |
|
| H.-Shaft
dimensions |
ø10 mm ,ø12 mm ,ø14 mm ,ø15 mm ,ø16 mm |
|
| H.-Shaft loads |
Axial max. 50 N |
| Radial max. 50 N |
|
|
| Start torque |
<0,01Nm at 25°C |
|
| Mass moment of
inertia |
6 gcm² |
|
|
| Bump |
10 G - 16 ms (1000 x 3 axis) |
|
| Vibration |
(10 - 2000 Hz)/10 G |
|
|
|
 DownLoad |
|
|
